One by one cut and split strip of steel
coil, put on the opening rack，thirty-four steel strip
through the multi row of
rolling road leveling,
transfer，transported to the pressure welding area.
According to the command
of the control center,the fixture automatically adjusts the spacing, the cross bar also adjust the spacing according to the instruction place,location of solder joint in accordance with the instructions.
Screen display to be welded is G405/40/50, grating length 1650mm, width 1325mm.
According to the
automatic detection of
data processing, welding
current, welding time
and pressure to
determine the size of
Servo feed, forward a stroke, is another
pressure welding procedure.
The control center instruction press welding procedure to stop,
because this piece of steel grating have welded.
The rapid rise of
hydraulic shear cutting,
a steel grating welding
Screen showing the size of the steel grating data and laser coding,
the green light to meet the requirements of the directive, was
released into the OK channel, along the open N# channel, left the
pressure welding line.
Another steel grating pressure welding is completed, the hydraulic
shear also completed the reset action. The screen shows that the
grating is G405/30/100, the length of the grating 1500mm, grating
The alarm was raised, there is a plate of steel strip away over, need to manually connect.